Highlights
- Copper bearing steel receivers
- Optional stainless steel receivers
- To 65,000 sq. Ft. Edr
- To 60 psig discharge pressure
- Completely factory assembled
- Controls mounted and wired
Modifications List
304 Stainless steel receeiver: #303, 304 and 416 grades available
Galvanizing of receiver: Hot-dip galvanized inside and outside.
Special receiver coatings: Special interior and exterior coatings where job conditions require extra corrosion resistance.
Inlet strainers: Y and basket type.
Manhole: manhole and bolted cover for clean-out and inspection.
Drain valve: tank drain connection can be fitted with bronze drain valve.
Pressure gauges: pressure gauge available for each pump discharge.
Non-standard motor enclosures: standard enclosures are drip-proof. Totally enclosed and explosion-proof enclosures are available.
Features
RECEIVING TANK: 3/16” thick copper bearing steel fitted with gauge glass, stainless steel dial type thermometer, stainless steel pressure and vacuum gauges, and isolation valves for pumps
PUMPS: bronze fitted centrifugal, flange mounted to the receiver with 250 degree rated mechanical shaft seals, the seal chamber has a relief line back into the receiver to prevent air pockets or collection of abrasives near the mechanical seal. Motor and rotating assemblies are removable without disturbing discharge or return piping.
MOTOR: open drip proof close coupled to pump(s).
CONTROLS: nema 12 contrl simplex or duplex units is across the line magnetic starter(s) thermal overload(s), hand selector switch(s) pump lite(s) and momentary test for each motor, mechanical float switch for condensate switch for air pumps, water condensate float temperature switch.