Dimensions Table
| Pump Model | Discharge | Suction | CP | S | WA | X | YY | No. of Pump Stages |
| 2SCL | 2 | 3 | 19.375 | 4.625 | 9 | 6.75 | 9 | 1 |
| 2.5SSC | 2.5 | 3 | 30 | 4 | 18.25 (see note 1) | 11 | 11 | 2 |
| 3SC | 3 | 3 | 24.25 | 5 | 11.375 | 9 | 10 | 1 |
| 3SCH | 3 | 4 | 30 | 6.25 | 13.75 | 10.5 | 12 | 1 |
| 4SCH | 4 | 5 | 30 | 7 | 13.75 | 12 | 14 | 1 |
| 6SC | 6 | 8 | 30 | 7 | 13.75 | 12 | 14.75 | 1 |
1: The 'WA' dimension shown for the 2-1/2SSC pump is to the suction centerline. The 'WA' dimension to the discharge centerline for this pump is 12-3/4 inches.
2: All dimensions are in inches unless otherwisenoted. Don not use for construction purposes unless certified.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing above is viewed from opposite the motor end.
2: All dimensions are in inches unless otherwisenoted. Don not use for construction purposes unless certified.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing above is viewed from opposite the motor end.
Dimensions Table
| Pump Model | Motor Frame | Steel Base | HA | HB | HE | HF | HH | HO | SS | ZZ |
| 2SCL | 56 THRU 184T | 12 x 30 | 12 | 35 | 9.5 | 32.5 | 0.625 | 19 | 6 | 6 |
| 2SCL | 213T THRU 254T | 12 x 36 | 12 | 41 | 9.5 | 38.5 | 0.625 | 19 | 6 | 6 |
| 2.5SSC | 256T THRU 326TS | 12 x 42 | 12 | 47 | 9.5 | 44.5 | 0.625 | 20.5 | 8 | 6.375 |
| 2.5SSC | 364TS | 15 x 48 | 15 | 54 | 12 | 51.5 | 0.75 | 20.5 | 8.5 | 6.875 |
| 2.5SSC | 182T THRU 215T | 18 x 48 | 18 | 55 | 15 | 51.5 | 0.75 | 22.5 | 9 | 7.375 |
| 3SC | 254T THRU 256T | 12 x 36 | 12 | 41 | 9.5 | 38.5 | 0.625 | 21 | 7 | 7 |
| 3SC | 284TS THRU 324TS | 12 x 42 | 12 | 47 | 9.5 | 44.5 | 0.63 | 21 | 7 | 7 |
| 3SC | 213T THRU 286T | 15 x 42 | 15 | 48 | 12 | 45.5 | 0.63 | 22 | 7.5 | 7.5 |
| 3SCH | 324T THRU 326T | 15 x 48 | 15 | 54 | 12 | 51.5 | 0.75 | 25.25 | 8 | 6 |
| 3SCH | 364T | 15 x 54 | 15 | 60 | 12 | 57.5 | 0.75 | 25.25 | 8 | 6 |
| 4SCH | 215T THRU 286T | 15 x 48 | 15 | 54 | 12 | 51.5 | 0.75 | 24 | 7.25 | 6.375 |
| 4SCH | 324T THRU 326T | 15 x 54 | 15 | 60 | 12 | 57.5 | 0.75 | 24 | 7.25 | 6.375 |
| 4SCH | 364T | 18 X 54 | 18 | 61 | 12 | 57.5 | 0.75 | 24.5 | 7.75 | 6.875 |
| 6SC | 215T THRU 286T | 15 X 48 | 15 | 54 | 12 | 57.5 | 0.75 | 26.5 | 8.5 | 8.5 |
| 6SC | 324T THRU 326T | 15 X 54 | 15 | 60 | 12 | 57.5 | 0.75 | 26.5 | 8.5 | 8.5 |
1: The 'WA' dimension shown for the 2-1/2SSC pump is to the suction centerline. the 'WA' dimension to the discharge centerline for this pump is 12-3/4".
2: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
2: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
Dimensions Table
| Motor Frame Size | 3450 RPM HP | 1750 RPM HP | C |
| 56C | - | 0.75 | 10 |
| 143T | 1.5 | 1 | 11 |
| 145T | 2 thru 3 | 1.5 thru 2 | 12 |
| 182T | 5 | 3 | 13 |
| 184T | 7.5 | 5 | 14 |
| 213T | 10 | 7.5 | 16 |
| 215T | 15 | 10 | 18 |
| 254T | 20 | 15 | 21 |
| 256T | 25 | 20 | 23 |
| 284T | - | 25 | 24 |
| 284TS | 30 | - | 22 |
| 286T | - | 30 | 25 |
| 286TS | 40 | - | 24 |
| 324T | - | 40 | 26 |
| 324TS | 50 | - | 25 |
| 326T | - | 50 | 28 |
| 326TS | 60 | - | 26 |
| 364T | - | 60 | 29 |
| 364TS | 75 | - | 27 |
1: The 'WA' dimension shown for the 2-1/2SSC pump is to the suction centerline. the 'WA' dimension to the discharge centerline for this pump is 12-3/4".
2: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing above is viewed from opposite the motor end.
3: All 1-stage pumps are furnished with standard 125# ASA suction and discharge flange connections. The 2-stage pumps are furnished with a standard 125# ASA suction flange connection and a standard 250# ASA discharge flange connection.
4: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing above is viewed from opposite the motor end.
Dimensions Table
| Pump Model | Discharge | Suction |
| 2SCL | 2 | 3 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
Dimensions Table
| Motor Frame | 3450 RPM HP | 1750 RPM HP | 1150 RPM HP | C | D | HT | C.I. Base No. |
| 56 | - | 0.75 | - | 11.625 | 7.625 | 0.5 | BP-110 |
| 56 | - | - | 0.5 | 12.375 | 7.625 | 0.5 | BP-110 |
| 143T | - | 1 | 0.75 | 11.75 | 7.625 | 0.5 | BP-110 |
| 145T | - | 1.5 thru 2 | 1 | 12.75 | 7.625 | 0.5 | BP-110 |
| 182T | 5 | 3 | 1.5 | 12.625 | 7.625 | 0.5 | BP-110 |
| 184T | 7.5 | 5 | 2 | 13.625 | 7.625 | 0.75 | BP-110 |
| 213T | 10 | 7.5 | - | 15.75 | 7.625 | 0.875 | BP-110 |
| 215T | 15 | - | - | 17.25 | 7.625 | 0.875 | BP-110 |
| 254T | 20 | - | - | 20.5 | 9 | 0.875 | BP-111 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge from the left. The end view drawing ais viewed from opposite the motor end.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge from the left. The end view drawing ais viewed from opposite the motor end.
Dimensions Table
| Pump Model | Discharge | Suction |
| 3SC | 3 | 3 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections. 250# ASA suction and discharge flange connections are furnished only when requested.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on this page is viewed from opposite the motor end.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections. 250# ASA suction and discharge flange connections are furnished only when requested.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on this page is viewed from opposite the motor end.
Dimensions Table
| Motor Frame | 1750 RPM HP | 1150 RPM | C | HT | D | C.I. Base No. |
| 145T | - | 1 | 12.75 | 0.5 | 9 | BP-111 |
| 182T | 3 | 1.5 | 12.625 | 0.5 | 9 | BP-111 |
| 184T | 5 | 2 | 13.625 | 0.75 | 9 | BP-111 |
| 213T | 7.5 | 3 | 15.75 | 0.875 | 9 | BP-111 |
| 215T | 10 | 5 | 17.25 | 0.875 | 9 | BP-111 |
| 254T | 15 | 7.5 | 20.5 | 1 | 9 | BP-111 |
| 256T | 20 | - | 22.25 | 1 | 9 | BP-111 |
| 284T | 25 | - | 23.5 | 1 | 9.75 | BP-111 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections. 250# ASA suction and discharge flange connections are furnished only when requested.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on this page is viewed from opposite the motor end.
2: Pumps shown on this page are single stage and are furnished with standard 125# ASA suction and discharge flange connections. 250# ASA suction and discharge flange connections are furnished only when requested.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on this page is viewed from opposite the motor end.
Dimensions Table
| Pump Model | Discharge | Suction | DO | S | X | Z | YY |
| 3SCH | 3 | 4 | 11 | 6.25 | 10.5 | 8.25 | 12 |
| 4SCH | 4 | 5 | 8.875 | 7 | 12 | 7.875 | 14 |
| 6SC | 6 | 8 | 11 | 7 | 12 | 7 | 14.75 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown on are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on is viewed from opposite the motor end.
2: Pumps shown on are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing on is viewed from opposite the motor end.
Dimensions Table
| Motor Frame | 1750 RPM HP | 1150 RPM HP | C | HT | D 3SCH 4SCH | D 6SC |
| 215T | 10 | 5 | 17.25 | 0.875 | 10.75 | 12 |
| 254T | 15 | 7.5 | 20.5 | 1 | 10.75 | 12 |
| 256T | 20 | 10 | 22.25 | 1 | 10.75 | 12 |
| 284T | 25 | 15 | 23.5 | 1 | 10.75 | 12 |
| 286T | 30 | 20 | 25 | 1.125 | 10.75 | 12 |
| 324T | 40 | - | 26 | 1.5 | 11.75 | 12 |
| 326TS | 50 | - | 26 | 1.5 | 11.75 | 12 |
| 364TS | 60 | - | 26.625 | 1.625 | 12.75 | - |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: Pumps shown are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
2: Pumps shown are single stage and are furnished with standard 125# ASA suction and discharge flange connections.
3: Standard rotation of all horizontally split case pumps is clockwise viewed from the motor end. Non-standard rotation (counter-clockwise viewed from the motor end) is furnished only when specified. Standard clockwise rotation viewed from the motor end has suction from the right and discharge to the left. The end view drawing is viewed from opposite the motor end.
