Dimensions Table
| Pump Model | Disch Size | Suc. Size | Suc and Disch. Conn. | A1 | AG | B | D | DD | E1 | F |
| 1-1/4CC | 1.25 | 1.5 | Screwed | 6.5 | 13 | 4 | 3.5 | 3.375 | 5 | 3 |
| 1-1/2CC | 1.5 | 2 | Flanged | 7.75 | 13 | 5.5 | 5.375 | 4 | 5 | 3 |
Note: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
Dimensions Table
| Pump Model | G | H | LA | P | X | X1 | Y | Z | ZA | ZB |
| 1-1/4CC | 0.0625 | (4) .3125 w. slots | 3.25 | 1 | 4.5 | 5 | 2.5 | 3.75 | - | 3.25 |
| 1-1/2CC | 0.0625 | (4) .3125 w. slots | 3.25 | 4.5 | 6 | - | 1.75 | - | 3.875 | 4.125 |
Note: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
Dimensions Table
| Pump Model | Discharge | Suction | A1 | DD | E1 | H1 | L | P (8) | Y | ZA (7) | ZB (7) | X |
| 1CG | 1 | 1.25 | - | 4.75 | - | - | - | 6.375 | 2.5 | 4.5 | 4.75 | 7 |
| 1.5CG | 1.5 | 2 | - | 5 | - | - | - | 6 | 2 | 4.625 | 5.125 | 8 |
| 2CG | 2 | 2.5 | - | 5.5 | - | - | - | 6.375 | 2.25 | 4.75 | 5.5 | 8 |
| 2.5CG | 2.5 | 3 | - | 5.5 | - | - | - | 6.5 | 2.5 | 5 | 6 | 8 |
| 3CG | 3 | 4 | - | 6 | - | - | - | 6.625 | 2.5 | 5.5 | 6.5 | 9 |
| 1.5CK | 1.5 | 2 | 12 | 6.125 | 10.5 | 0.75 | 5.1875 | 6.25 | 2.25 | 6 | 6.5 | 10 |
| 2CK | 2 | 2.5 | 12 | 7 | 10.5 | 0.75 | 5.25 | 6.5 | 2.25 | 6.375 | 7 | 10 |
| 2CKH | 2 | 3 | 12 | 7.5 | 10.375 | 0.75 | 5.75 | 6.5 | 1.5 | 7.75 | 8.25 | 11.5 |
| 2.5CK | 2.5 | 3 | 12 | 7 | 10.5 | 0.75 | 5.3125 | 6.5 | 2.25 | 6.625 | 7.125 | 10.5 |
| 3CK | 3 | 4 | - | 7.25 | - | - | - | 7.25 | 2.75 | 6.75 | 7.125 | 11 |
| 4CKL | 4 | 5 | - | 7.75 | - | - | - | 7.125 | 2.375 | 7 | 8.625 | 12 |
| 4CK (6) | 4 | 5 | 12 | 10 | 10.375 | 0.75 | 4.5 | 11.375 | 4 | 18 | 4.5 | 10 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: AG dimensions are approximate and may vary with motor.
3: All models have 125# ASA standard suction and discharge flange connections, regardless of the shape of the pump suction boss (square, scallopped, etc.). They are all designed to mate directly to a round ASA standard 125# mating flange (or 250# if specified). Install a standard round ring gasket or full gasket (full gasket preferred) between the pump suction boss and the standard mating flange.
4: For pumps with 250# flanged suction and discharge connections, consult the factory.
5: For all models (except 4CK) have centerline discharge as shown in the drawings. The 4CK model has vertical up discharge on the right side of the pump casing.
7: The ZA and ZB dimensions for 4CK pumps, apply to the center of the pump discharge only and do not apply to the center of the pump suction connection.
8: Add one inch to the P dimension shown for pumps built with motors 15 HP 1750 RPM & larger or 20 HP 3450 RPM & larger.
2: AG dimensions are approximate and may vary with motor.
3: All models have 125# ASA standard suction and discharge flange connections, regardless of the shape of the pump suction boss (square, scallopped, etc.). They are all designed to mate directly to a round ASA standard 125# mating flange (or 250# if specified). Install a standard round ring gasket or full gasket (full gasket preferred) between the pump suction boss and the standard mating flange.
4: For pumps with 250# flanged suction and discharge connections, consult the factory.
5: For all models (except 4CK) have centerline discharge as shown in the drawings. The 4CK model has vertical up discharge on the right side of the pump casing.
7: The ZA and ZB dimensions for 4CK pumps, apply to the center of the pump discharge only and do not apply to the center of the pump suction connection.
8: Add one inch to the P dimension shown for pumps built with motors 15 HP 1750 RPM & larger or 20 HP 3450 RPM & larger.
Dimensions Table
| Motor Frame | 1750 RPM HP | 3450 RPM HP | AG | A2 | B | D | E2 | F | G | H2 | H3 | LA | LB (ALL BUT 4CK) | LB (4CK) |
| 56C | .75 & less | 1 & less | 11 | 10 | 7 | 5.25 | 8.75 | - | 0.5 | - | 0.75 | 2.75 | 5.5 | - |
| 143JM | 1 | 1.5 | 11.25 | 10 | 7 | 5.25 | 8.75 | - | 0.5 | - | 0.75 | 2.875 | 5.75 | - |
| 145JM | 1.5 thru 2 | 2 thru 3 | 11.5 | 10 | 7 | 5.25 | 8.75 | - | 0.5 | - | 0.75 | 2.875 | 6.25 | - |
| 182JM | 3 | 5 | 14 | 12.25 | 7 | 5.25 | 10.75 | - | 0.5 | - | 0.75 | 3.5 | 6.5 | - |
| 184JM | 5 | 7.5 | 14 | 12.25 | 7 | 5.25 | 10.75 | - | 0.5 | - | 0.75 | 3.5 | 7 | - |
| 213JM | 7.5 | 10 | 16.25 | 9.625 | 6.4375 | 5.25 | 8.5 | 5.5 | 0.5 | 0.40625 | - | 4.25 | 7.75 | 10 |
| 215JM | 10 | 15 | 17.75 | 9.625 | 7.9375 | 5.25 | 8.5 | 7 | 0.5 | 0.40625 | - | 4.25 | 8.5 | 10.75 |
| 254JM | 15 | 20 | 21 | 11.375 | 9.5 | 6.25 | 10 | 8.25 | 0.5 | 0.53125 | - | 4.75 | 10.625 | 11.875 |
| 256JM | 20 | 25 | 23 | 11.375 | 11.25 | 6.25 | 10 | 10 | 0.5 | 0.53125 | - | 4.75 | 11.5 | 12.75 |
| 284JP | 25 | 30 | 19 | 14 | 11.125 | 7 | 11 | 9.5 | 0.5 | 0.53125 | - | 4.75 | - | 12.5 |
| 286JP | 30 | 40 | 21 | 14 | 12.625 | 7 | 11 | 11 | 0.5 | 0.53125 | - | 4.75 | - | 13.25 |
| 324JP | 40 | 50 | 21 | 16 | 12.875 | 8 | 12.5 | 10.5 | 0.5 | 0.65625 | - | 5.25 | - | 13.5 |
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: AG dimensions are approximate and may vary with motor style.
3: All models have 125# ASA standard suction and discharge flange connections. Regardless of the shape of the pump suction boss (square, scallopped, etc.), they are all designed to mate directly to a round ASA standard 125# mating flange (or 250# if specified). Install a standard round ring gasket or full gasket (full gasket preferred ) between the pump suction boss and the standard mating flange.
4: For pumps with 250# flanged suction and discharge connections, consult the factory.
5: For all models, the standard discharge position is veritcal-up. Other discharge positions will be furnished only when requested.
6: All pump models (except 4CK) have centerline discharge as shown in the drawings. The 4CK model has vertical-up discharge on the right side of the pump casing.
7: The ZA and ZB dimensions for 4CK pumps, apply to the center of the pump discharge only and do not apply to the center of the pump suction connection.
8: Add one inch to the P dimension shown for pumps built with motors 15 HP 1750 RPM and larger or 20 HP 3450 RPM and larger.
2: AG dimensions are approximate and may vary with motor style.
3: All models have 125# ASA standard suction and discharge flange connections. Regardless of the shape of the pump suction boss (square, scallopped, etc.), they are all designed to mate directly to a round ASA standard 125# mating flange (or 250# if specified). Install a standard round ring gasket or full gasket (full gasket preferred ) between the pump suction boss and the standard mating flange.
4: For pumps with 250# flanged suction and discharge connections, consult the factory.
5: For all models, the standard discharge position is veritcal-up. Other discharge positions will be furnished only when requested.
6: All pump models (except 4CK) have centerline discharge as shown in the drawings. The 4CK model has vertical-up discharge on the right side of the pump casing.
7: The ZA and ZB dimensions for 4CK pumps, apply to the center of the pump discharge only and do not apply to the center of the pump suction connection.
8: Add one inch to the P dimension shown for pumps built with motors 15 HP 1750 RPM and larger or 20 HP 3450 RPM and larger.