1: The U dimension is .9375 inches for pumps rated 15 HP 3450 RPM and smaller and 10 HP 1750 RPM and smaller.
2: The U dimension is 1.125 inches for pumps rated 20 HP 3450 RPM and larger and 15 HP 1750 RPM and larger.
3: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
4: All models have standard 125# flanged suction and discharge connections.
5: The standard discharge position is vertical-up. Other discharge positons will be furnished only when requested.
6: All Pump models except the 4CKB model have centerline discharge as pictured above. The 4CKB has a vertical-up discharge on the right side of the volute.
8: Regardless of the shape of the pump suction boss (square, scallopped, etc.) They are all designed to mate directly to a round ASA standard 125# mating flange (250# when specified). Install a standard round ring gasket or full gasket (full gasket preferred) between the pump suction boss and the standard mating flange.

SUCTION FLANGE:
Regardless of the shape of the pump suction boss (square, scallopped, etc.) They are all designed to mate directly to a round standard 125# mating flange (250# when so specified). Install a standard round ring gasket or full gasket (full gasket preferred) between the pump suction boss and the standard mating flange.
NOTE 6: The 4CKB model does not have a centerline discharge. The 4CKB model has a vertical-up discharge on the right side of the pump casing.

1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: HP dimensions are approximate and may vary with motor style.
3: All models (except 1.25CCB which has an NPT connection) have standard 125# ASA flanged suction and discharge connections.
4: For pumps with 250# ASA flanged suction and discharge connections, consult the factory.
5: For all models, the standard discharge position is vertical-up. Other discharge positions will be furnished only when requested.
6: All pump models (except 1.25CCB and 4CKB) have centerline discharge as shown in the drawings. The 1.25CCB and 4CKB models have vertical-up discharge in the right side of the pump casing.

1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: HP dimensions are approximate and may vary with motor style.
3: All models (except 1.25CCB which has an NPT connection)have standard 125# ASA flanged suction and discharge connections.
4: For pumps with 250# ASA flanged suction and discharge connections, consult the factory.
5: For all models, the standard discharge position is vertical-up. Other discharge positions will be furnished only when requested.
6: All pump models (except 1.25CCB and 4CKB) have centerline discharge as shown in the drawings. The 1.25CCB and 4CKB models have vertical-up discharge in the right side of the pump casing.

1: All dimensions are in inches unless otherwise noted.
2: Do not use for construction purposes unless certified.
3: The standard channel steel bases listed above are used with the following Federal Pump Units:
CCB M CCH BFC
CGB SC HT BFT
CKB SSC HTCR