Parts List 229.4A

Part no.	Name	Required
1	upper motor housing	1
2	insulation disc	1
3	cap screw	-
4	rotor-stator assembly	-
5	o-ring	1*
6	cap screw	-
7	lower motor housing	1
8	shaft seal	1*
9	impeller	1*
10	volute	1
12	plug	2
13	handle ring	1
14	cord connector	1*
15	power cord	1*
-	dielectric oil	-

1. Parts shown above may vary somewhat for certain type P pump models. 2. Part numbers shown above are not standard Federal Pump part numbers. * recommended spare parts to be carried in stock.

Parts List 229.12B

			Materials of Construction
Part no.	Name	Required	Standard Fitted	All Iron	All Bronze
1	pump casing (a)	1	cast iron	cast iron	bronze
2	impeller (b)	1*	cast iron	cast iron	bronze
3	impeller lock screw	1*	st. st.	st. st.	brass
4	impeller washer	1*	st. st.	st. st.	st. st.
6	impeller key	1*	steel	steel	st. st.
22	cap screw	-	steel	steel	brass
50	nut	-	steel	steel	brass
69	washer	-	steel	steel	brass
77	casing elbow gasket ©	1	rubber	rubber	rubber
90	discharge flange	1	cast iron	cast iron	bronze
91	discharge pipe gasket	1	rubber	rubber	rubber
95	casing elbow ©	1	cast iron	cast iron	bronze
96	stand leg	3	cast iron	cast iron	bronze
101	motor adaptor plate (d)	1	cast iron	cast iron	bronze
110	motor	1	various	various	various
124	impeller hub spacer	1*	steel	steel	st. st.

* recommended spare parts to be carried in stock (a) VSS-4E, 5E & 6E pumps have a separate suction plate (#38). (b) VSS-3A & 4A pumps have semi-open impellers as shown. All other pumps have enclosed impellers. (c) VSS-6H pumps have the casing elbow (#95) cast integral with the pump casing (#1). (d) The motor adaptor plate (#101) is only required for certain horsepowers.

Parts List 229.13

			Materials of Construction
Parts	Name	Required	Standard Fitted	All Iron	All Bronze
1	pump casing	1	cast iron	cast iron	bronze
2	impeller	1	cast iron	cast iron	bronze
3	impeller lock screw	1*	st. st.	st. st.	brass
4	impeller washer	1*	st. st.	st. st.	st. st.
6	impeller key	1*	steel	steel	st. st.
9	mechanical shaft seal	2	various	various	various
21	plug	2	steel	steel	brass
22	capscrew	-	steel	steel	brass
50	nut	-	steel	steel	brass
69	washer	-	steel	steel	brass
77	casing elbow gasket	1	rubber	rubber	rubber
78	snap ring	1	st. st.	st. st.	st. st.
90	discharge flange	1	cast iron	cast iron	bronze
90A	removal plate discharge flange	1	cast iron	cast iron	rubber
91	discharge pipe gasket	1	rubber	rubber	rubber
91A	removal plate discharge pipe gasket	1	rubber	rubber	various
94	cord grip	1	various	various	bronze
95	casing elbow	1	cast iron	cast iron	bronze
96	stand leg	3	cast iron	cast iron	bronze
97	back plate	1	cast iron	cast iron	bronze
101	motor adaptor plate	1	cast iron	cast iron	bronze
103	cover removal plate	1	steel	steel	steel
108	nameplate	-	st. st.	st. st.	st. st.
-	removal pl. fasteners & packing	-	various	various	various
122	electrical connector	3	plastic	plastic	plastic
124	impeller hub spacer	1	steel	steel	st. st.
165**	rotor-stator assembly	1	various	various	various
166	motor housing	1	cast iron	cast iron	bronze
167	bottom motor bracket	1	cast iron	cast iron	bronze
168	motor electrode	2	steel	steel	-
169	motor cable set	1	various	various	various
170	motor housing o-ring	1	rubber	rubber	rubber
171	back plate o-ring	1	rubber	rubber	rubber
172	lifting ring	1	steel	steel	brass
173	motor housing oil	-	oil	oil	oil
174	electrode wire	2	copper	copper	-

*Recommended spare parts to be carried in stock **Rotor-Stator assembly includes the following basic parts: Rotor, Stator, Shaft, Radial Ball Bearing, Thrust Ball Bearing, Studs, Stator Shell, Top End Bell and Stator Leads. Some parts listed in the table are not shown in the drawing. Some of the parts listed may not be required for all pump sizes and models.