Features

PUMP FEATURES:
The cast iron pump casing has a smooth waterway to insure maximum efficiency when handling sewage. Cast iron legs elevate the pump to permit flow into the impeller. Rabbeted construction insures complete alignment of the rotating element. The cast iron impeller is of non-clog design for handling water containing solids, and is balanced prior to assembly. The vertical discharge flange and gasket permit easy installation of plain-end discharge pipe.

MOTOR FEATURES:
Motors are available for 1750, 1150 and 870 RPM operation with both single phase and three phase windings. All motors are fully submersible and have pre-lubricated ball bearings, stainless steel shaft and fasteners.

Special motors with U.L. listing for Class 1, Group D explosion-proof service can be furnished, if required.

Motors are rated for continuous duty submerged. Motor housing and bottom motor bracket are cast iron. Double seals provide protection for the electrical parts. If the outer seal fails, the inner seal protects the motor while water enters the oil-filled seal chamber. Motors are furnished with 25-ft. of power cable and ground wire.

The standard motors are rated for operation in 40 degrees C (104 F) water, but can be modified for higher ambient temperatures.

Motors can be furnished with moisture detection electrodes for the seal chamber and thermal detectors for the windings, if required.