Features

CASING: Standard pumps are built with the suction connection 180 degrees from the discharge connection. Casings can be field rotated for 90 degree position changes. Suction and discharge connections are standard ASA flanges. Top pull-out design permits removal of the rotating assembly without disconnecting suction and discharge piping. Centerline discharge permits straight-through piping.

IMPELLER: Single piece enclosed bronze balanced impellers, with diameters cut for specific condition points.

SHAFT: The pump end is mounted on the motor shaft, eliminating alignment problems. A bronze shaft sleeve prevents contact between the shaft and the liquid being pumped.

MECHANICAL SHAFT SEAL: A leakless mechanical shaft seal is standard on all models with ceramic and carbon faces, and stainless steel metal parts. A copper bypass line flushes the seal chamber to prevent dead-ending of abrasives.

MOTORS: Pumps are built with standard NEMA frame drip-proof motors. Totally enclosed and explosion proof motors are available, as options. Fractional horsepower single phase motors have built-in overload protection. All other motors should be provided with magnetic starters.

MODIFICATIONS: Standard pumps are bronze-fitted. Liquid ends can be furnished in all-bronze or all-iron construction, as options. These pumps are also available in close-coupled horizontal style and in flexible coupled horizontal style.

MODEL NUMBERS: Example 3CGF-10-2; 3 is the pump discharge size (3 inches); CG is the impeller diameter range (CC -small diameter, CG -medium diameter, CK -large diameter); F is the mounting style (F-flange mounted, L-inline mounted, Y-floor mounted ); 10 is the motor horsepower; 2 is the motor speed (2-pole 3450 R.P.M., 4-pole 1750 R.P.M.)

NOTE: Construction of CCF, CCL and CCY models varies somewhat from the construction described for the other models.