Features

SC

CASING: Close-grained cast iron, horizontalIy split thru center of shaft for simple removal of entire rotating assembly without disturbing suction and discharge pipe connections. Both sections are bored and faced in one machine setting to insure perfect alignment. Standard pumps, viewed from the drive end, have suction on the right; the reverse can be specified when pump is ordered.

IMPELLER: Double suction design insures perfect hydraulic balance. Impeller is machined from single piece bronze casting, balanced and cut to meet exact conditions of service required.

WEARING RINGS: Bronze wearing rings are easily replaced; insure minimum slippage and high efficiency.

SHAFT: Turned and ground to insure maximum power transmission with minimum vibration or deflection.

SHAFT SLEEVES: Cast bronze sleeves extend through stuffing box; easily replaced; protect the shaft from corrosion and wear.

BEARINGS: Nationally recognized manufacturer. Heavy duty ball bearing grease lubricated.

STUFFING BOXES: Ample depth for maximum pump working pressures. Lantern ring water-seal available if required. Glands are bronze split type for simple packing adjustment (mechanical shaft seals are available if preferred).

COUPLING: Flexible type; sized for maximum power transmission.

BEDPLATE: Steel baseplates are standard. Cast iron drip-rim type with drain tapping and grouting openings are also available.

DRIVERS: Electric motor drive is standard. Gasoline or diesel engine and steam turbine drivers are also available for special applications.

SSC

CASING: Close-grained cast iron, horizontalIy split thru center of shaft for simple removal of entire rotating assembly without disturbing suction and discharge pipe connections. Both sections are bored and faced in one machine setting to insure perfect alignment. Standard pumps, viewed from the drive end, have suction on the right; the reverse can be specified when pump is ordered.

IMPELLER: Single piece cast bronze, balanced and cut to meet exact conditions of service specified. Keyed and locked to shaft. The two impellers are mounted with opposed suction openings to provide for perfect hydraulic balance, eliminating thrust on the bearings.

WEARING RINGS: Bronze wearing rings are easily replaced; insure minimum slippage and high efficiency.

SHAFT: Turned and ground to insure maximum power transmission with minimum vibration or deflection.

SHAFT SLEEVES: Cast bronze sleeves extend through stuffing box; easily replaced; protect the shaft from corrosion and wear.

BEARINGS: Nationally recognized manufacturer. Heavy duty ball bearing grease lubricated.

STUFFING BOXES: Ample depth for maximum pump working pressures. Lantern ring water-seal available if required. Glands are bronze split type for simple packing adjustment (mechanical shaft seals are available if preferred).

COUPLING: Flexible type; sized for maximum power transmission.

BEDPLATE: Steel baseplates are standard. Cast iron drip-rim type with drain tapping and grouting openings are also available.

DRIVERS: Electric motor drive is standard. Gasoline or diesel engine and steam turbine drivers are also available for special applications.