SUGGESTED SPECIFICATIONS FOR ARCHITECTS AND ENGINEERS:

Furnish and install as shown on plans a Federal Type CCV Simplex (or Duplex) Condensation Return Unit with a rated capacity of___sq. ft. E.D.R. at a discharge pressure_____ p.s.i.g. at the pump.
(Each) Pump shall be designed to deliver____ G.P.M. at the specified discharge pressure.

Entire unit to be factory assembled with all controls mounted and wired thereon, and to include one (or two) close-coupled, bronze fitted centrifugal pump and motor unit(s) flanged to a cast iron (or steel) receiving tank of _____ gallon capacity.

Pump to have mechanical shaft seal and bronze shaft sleeve. Motor and rotating assembly to be removable without disturbing discharge piping.

Pump(s) to be close-coupled to NEMA motor(s) of H.P.,_____ Phase,____ cycles,____ volts_____R.P.M. drip-proof (or totally enclosed, or explosion-proof) enclosure.

(Each) Pump to be controlled by individual enclosed float switch; (if alternation is desired on duplex units, specify an alternating float switch in lieu of the two standard float switches).

Furnish a magnetic starter, mounted and wired, for each 3-phase motor or 1-phase motor in integral H.P. frame sizes. Single phase fractional H.P. frame motors shall have built-in overload protection switches.