SUGGESTED SPECIFICATIONS FOR ARCHITECTS AND ENGINEERS:

Furnish and install as shown on plans, a Federal Type CCH Simplex (or Duplex) Condensation Return Unit, with a rated capacity of _____sq. ft. E.D.R., with a discharge pressure of ______p.s.i.g. at the pump.

Entire unit to be factory assembled with all controls mounted and wired thereon, and to include one (or two) close-coupled, bronze-fitted, centrifugal pump and motor unit(s), and a heavy welded steel receiving tank of _____gallon capacity. Pump to have mechanical shaft seal and bronze shaft sleeve. Each pump to be rated at _____G.P.M. at the specified discharge pressure and close-coupled to NEMA motor(s) of _____H.P., _____, Phase _____, cycles _____, volts_____ R.P.M. drip-proof (or totally enclosed explosion-proof) enclosure(s).

(Each) pump to be controlled by individual enclosed float switch (if alternation is desired on duplex units, specify an alternating float switch in lieu of the two standard float switches).

Furnish a magnetic starter mounted and wired on the unit for each 3-phase motor, or for each single phase motor in integral H.P. frame sizes. Single phase fractional H.P. frame motors shall have built-in overload protection switches.