To confirm information about any of our products please contact a specialist by calling or emailing us directly.

Telephone: (718) 451-2000
Email: general@federalpumps.com


Availabity: Call us for availability
QUICK SHIP!: Call us for expedited shipping


Dimensions Table

Motor Frame1750 RPM HP3450 RPM HPAGA2BDE2FGH2H3LALB (ALL BUT 4CK)LB (4CK)
56C.75 & less1 & less111075.258.75-0.5-0.752.755.5-
143JM11.511.251075.258.75-0.5-0.752.8755.75-
145JM1.5 thru 22 thru 311.51075.258.75-0.5-0.752.8756.25-
182JM351412.2575.2510.75-0.5-0.753.56.5-
184JM57.51412.2575.2510.75-0.5-0.753.57-
213JM7.51016.259.6256.43755.258.55.50.50.40625-4.257.7510
215JM101517.759.6257.93755.258.570.50.40625-4.258.510.75
254JM15202111.3759.56.25108.250.50.53125-4.7510.62511.875
256JM20252311.37511.256.2510100.50.53125-4.7511.512.75
284JP2530191411.1257119.50.50.53125-4.75-12.5
286JP3040211412.625711110.50.53125-4.75-13.25
324JP4050211612.875812.510.50.50.65625-5.25-13.5
1: All dimensions are in inches unless otherwise noted. Do not use for construction purposes unless certified.
2: AG dimensions are approximate and may vary with motor style.
3: All models have 125# ASA standard suction and discharge flange connections. Regardless of the shape of the pump suction boss (square, scallopped, etc.), they are all designed to mate directly to a round ASA standard 125# mating flange (or 250# if specified). Install a standard round ring gasket or full gasket (full gasket preferred ) between the pump suction boss and the standard mating flange.
4: For pumps with 250# flanged suction and discharge connections, consult the factory.
5: For all models, the standard discharge position is veritcal-up. Other discharge positions will be furnished only when requested.
6: All pump models (except 4CK) have centerline discharge as shown in the drawings. The 4CK model has vertical-up discharge on the right side of the pump casing.
7: The ZA and ZB dimensions for 4CK pumps, apply to the center of the pump discharge only and do not apply to the center of the pump suction connection.
8: Add one inch to the P dimension shown for pumps built with motors 15 HP 1750 RPM and larger or 20 HP 3450 RPM and larger.