Single Station Panel

Furnish and install as shown on plans a Type B single station alarm panel, as manufactured By Federal Pump Corporation, in nema-1 wall mounting (or nema-4 watertight) enclosure. The panel shall include an alarm light and silencing button on the cover, plus a 4" 110 volt nell for field wiring to the panel. The panel shall be rated for 110 volt (or 220 volt service). The silencing button shall stop the ringing of the alarm bell, but the alarm light shall continue to glow until the alarm condition is corrected.

Multi-Station Panels

Furnish and install as shown on plans a Type B multi-station alarm panel, as manufactured by Federal Pump Corporation, in nema-1 wall mounting (or nema-4 watertight) enclosure. The panel shall include _____________ alarm lights for the alarm conditions (plus spare circuits) enumerated below and a silencing button on the cover. A 4" 110 volt bell shall also be mounted on the cover for audible alarm signal. The panel shall be rated for 110 volt (or 220 volt)service and shall have a fused alarm circuit and terminal strip.

The silencing button shall stop the ringing of the alarm bell when pressed. Each alarm light shall have a legend plate indicating what alarm condition it represents, and shall glowat 10% brilliance at all times. When an alarm condition occurs the applicable light will glow at 100% brilliance until the alarm condition is corrected.

The following alarm conditions and spare circuits shall be included in the panel: